|
SPECIFICATIONS
RF OUTPUT
Frequency Range: 1435.5 to 1539.5; 1710.0 to 1850.0; 2200.5 to 2299.5; 2300.5 to 2399.5 MHz in 1.0 MHz Steps
Frequency Selection: Via MDM-9P Connector
Power: +10 dBm Maximum without Damage
VSWR: 1.5:1 Maximum
Impedance: 50 Ohms Nominal
Noise Figure: 6 dB Maximum
Signal Strength Output: Monotonic: 0.1 V at -100 dBm; 5 V at -30 dBm
LO'S/IF'S
Stability: Within ±0.002% over -20°C to +70°C
1st IF: 510MHz
2nd IF: Dependent upon Bit Rate
IF Bandwidth: 1.4 X Specified Bit Rate
Harmonic & Spurious Level: -60 dB Maximum
Output Level: TTL Compatible
Bit Rate: 100 Bits/Sec to 15 MBits/Sec Maximum
POWER REQUIREMENTS
Input Voltage: +28 ±4 VDC: Reverse Polarity Protected
Input Current: 400 mA Maximum
ENVIRONMENTAL SPECIFICATIONS
Temperature: Operating: -20°C to +70°C; Storage: -54°C to +125°C
Vibration: 6 G's, Random, Standard Haystack, 20 Hz to 2 KHz, 3 Axes
Shock: 1/2 Sine, 100 G's Pk, 11 mS, 3 Axes
Acceleration: 100 G's, 3 Axes
Altitude: Unlimited
Humidity: To 95% at any Temperature forming Frost or Condensation
PHYSICAL CHARACTERISTICS
Dimensions: Per Outline Drawing
Weight: 32 oz. Maximum
|
